Important Notices & Announcements
SPA Series Devices - Auto Provisioning
NOTE: Depending on your model and the installed firmware version, you may have different web interface formats, settings, and functionality.
To auto provision a Cisco/Linksys SPA Series device:
1. Factory reset the phone
2. When the phone powers on identify its IP Address using the menu key (located on the right with a folded page icon), then, depending on your model, either arrow down to:
A. the "Network" option and press the "Select" button.
B. the "Status" option, then arrow down to "Network Status"
3. Enter the following into your. Then press "Enter". (This make take a few minutes to complete and your phone will reboot several times.):
- Replace PHONE_IP_ADDRESS with the IP Address displayed on the screen from step 2. ie. 192.168.1.100
- Replace PHONE_SYSTEM_URL with the URL of your phone system. ie. mycompany.jjcom.com