SPA8000 firmware update

NOTE: This procedure should only be necessary if you manually configured your device. Auto-Provisioning does this automatically. 

Upgrade firmware for SPA-8000

http://[spa-8000-address]/admin/upgrade?http://www.jjcom.com/firmware/cisco/spa8000/spa8000-6-1-12-XU.bin

For example: http://192.168.1.154/admin/upgrade?http://www.jjcom.com/firmware/cisco/spa8000/spa8000-6-1-12-XU.bin

When the upgrade has started the status light will start flashing rapidly. It will then reboot and you can log back into the system.